Panasonic WJ-ND400 Operating Instructions Manual page 83

Major Operating Controls and Their Functions
(5) HDD bay slots
Up to 9 HDD can be installed (one HDD unit is installed at the
factory).
Note:
• Limiting factors for the RAID5/RAID6 mode.
RAID5 mode : The RAID5 mode can be used when
RAID6 mode : The RAID6 mode can be used when
(6) RAID mode switch [RAID]
Switches the HDD operational mode (Single, RAID5, or
RAID6).
The settings become effective after setting the HDD
operation mode with the [RAID] switch and turning on the
power while holding down the [USE] button to boot up.
S
R5
R6
Important:
• The HDD operation mode cannot be changed once the
system is operating. Recorded data may not be read correctly
when the mode is changed after the system is operating.
(7) Removal knob
Used when replacing the HDD units.
14
more than three HDDs are installed.
more than four HDDs are installed.
: SINGLE mode (default)
: RAID5 mode
: RAID6 mode