User Management; Basics - Panasonic WJ-ND400 Operating Instructions Manual

User management

Configure the user and host authentication required to access the recorder from a PC.
It is possible to restrict access by users and hosts (PCs).

Basics

Use the following procedure to specify whether user and host authentication should be performed.
1
Click the [User mng.] button on the setup menu.
2
On the sub-menu that appears, click [Basic].
This displays the basic user management settings window.
Basic user management settings
Item
User authentication
Host authentication
♦Initial default
Settings
Off / On♦
Off♦ / On
3
Configure the settings for each item.
Refer to "Basic user management settings" table for details
about the settings.
4
Click the [Set] button.
Description
Specifies whether user authentication should be performed.
Specifies whether host authentication should be performed.
• [On] cannot be selected for host authentication unless the
host is registered. First perform settings for the "Hosts
(page 71)".
67