List Of Functions; Setup Menu List - Panasonic WJ-ND400 Operating Instructions Manual

Event operations include the following.
• Start recording images
Recording is done according to the recording duration and rate
settings on the settings menu. The images from a camera before
an event occurs can be recorded and linked to the event (pre-
record event).
• Display alarm messages
A pop-up screen appears to indicate an event has occurred.
• Alarm indicator blinks
Alarm indicator on the front of the recorder blinks.
• Buzzer sounds
The buzzer sounds according to the settings on the settings
menu.
• The camera goes to its preset position.
The camera moves to a pre-registered preset position.
• Notification email sent when event occurs
Alarm mail (notification of the time and date of an event) is sent to
registered email addresses when an event occurs. An image can
be attached to this email. Up to 4 addresses can be registered to
receive the alarm mail.

List of Functions

Live Monitoring
Function
1-screen Live images from cameras (including audio) are displayed on one screen.
The camera can be operated from the recorder when one screen is displayed (refer to the Operating
Instructions (PDF file)).
4-screen Live images from a camera are displayed on multi-screen.
Sequential display Images from multiple cameras are shown in preset sequence on the screen.
Recording
Function
Emergency recording
Event post recording
Manual recording
Schedule recording
Pre-event recording
* Order of priority: Images are recorded in the highest priority mode if more than one mode is enabled.

Setup Menu List

Refer to the Setup Instructions (PDF file) for information about the settings menu list.
Order of
*
priority
1 Recording is done when an emergency occurs.
2 Recording is automatically done after various events occur.
3 Recording of images and audio can be started and stopped manually.
4 Recording is done automatically during a set time period.
5 Recording is automatically done before various events occur.
Outline of Functions
• Alarm signal output from the Alarm/Control connector on the rear
panel of the recorder (Alarm output)
When an event occurs, a signal is output from the Alarm
connector on the rear panel of the recorder to sound an alarm
etc.
• Event log is recorded.
When an event occurs, the type of event and the time it occurred
are recorded in an event log.
• Images recorded during events are transmitted to an FTP server.
When an event occurs, images are recorded from when the
event starts for a set period of time and are automatically
transmitted to an FTP server.
• A PC is notified of an alarm according to Panasonic alarm
protocol settings.
When an event or error occurs, a PC is automatically notified
regarding event or error information according to the [Panasonic
alarm protocol] settings. Install the software (option) on the PC
designated to receive and display event or error notification.
Refer to the "readme.txt" file on the CD-ROM for details about the
software.
Description
Description
19