Digital Output - D-Link DCS-5020L User Manual

Section 4 - Configuration
This screen allows you to control the behavior of digital input and
digital output devices. The I/O connector provides the physical
interface for digital output (DO) and digital input (DI) that is used
for connecting a variety of external alarm devices such as IR-
Sensors and alarm relays. The digital input is used for connecting
external alarm devices and once triggered images will be taken
and e-mailed.
D/O Signal:
You can enable the digital output port as well
as configure a trigger event.
Trigger by:
You may choose a trigger event like Motion
detection or an external trigger from the D/I
port. When an event is triggered, the D/O will
begin sending a signal.
Trigger by
Allow user to trigger Digital Output at Live View.
Manual:
Motion:
When a motion is detected, IP Camera will
trigger traditional alarming devices that
connect to the system.
Digital Input:
When triggering the digital input device, IP
Camera will trigger traditional alarming devices
that connect to the system.
Sound:
When sound is detected, IP Camera will trigger
traditional alarming devices that connect to
the system.
D-Link DCS-5222L User Manual

Digital Output

46