Network - D-Link DCS-5020L User Manual

Section 4 - Configuration
This section allows you to configure your LAN and Internet
configuration.
Automatic IP This option is used if you would like an IP address
Address Select: assigned to your camera automatically by the DHCP
server (router). If the DHCP server does not exist
you will need to manually configure this setting.
Static IP This option is used to manually configure your
Address: Camera's IP settings. If this is selected, you will
need to enter the necessary information in order
to access your camera over a network.
PPPoE: Enable this option if the camera is directly
connected to a modem and your ISP requires a
user name and password in order to connect to
the Internet.
HTTP Port:
This option allocates the HTTP port of the camera.
RTSP Port:
This option allocates the RTSP port of the camera,
the RSTP port allows connections using QuickTime
or other supported media players.
UPnP Enable:
UPnP™ (Universal Plug & Play) can be used to allow discovery of a camera as a UPnP device in your network.
UPnP Port
If your router supports UPnP, your camera and router can communicate allowing the router to discover which
Forward: ports are used by each camera automatically without the need to open ports or port forward.
Bonjour: Enabling Bonjour will allow discovery of cameras by Mac computers.
D-Link DCS-5222L User Manual

Network

33