D-Link Dcs-5222L User Manual - D-Link DCS-5020L User Manual

Section 4 - Configuration
Video Clip Notifications is a feature to send recorded video via
FTP or e-mail when a trigger is activated. This step will only setup
notifications to be sent with video clips.
Enable:
Check this box to enable the Video Clip Notifi-
cation function.
Only During:
Check this box to setup a scheduled time-
frame when notifications should be sent. This
is useful if you do not want to be notified
when it would otherwise be inconvenient,
such as during the night or on weekends.
Video Clip Type:
The Video Clip Wizard uses Profile 2 by de-
fault. More information about video profiles
can be found on page 38. You can set the file
type from the drop down menu. You can also
specify how many seconds before the event
that triggered recording should be sent, as
well as how long the maximum duration of
the video clip should be in seconds.
Target:
Select where you want the video clip to be
sent. It may either be uploaded to an FTP or
e-mailed to an e-mail address. You will need
to have all of the necessary information filled
out in order to use either of these features.
Click Next to continue.

D-Link DCS-5222L User Manual

30