Advanced; Digital Input/Output - D-Link DCS-3714 User Manual

Hd day and night wdr camera with lowlight+

Table of Contents

Configuration

This screen allows you to control the behavior of digital input and digital output devices. The I/O connector provides the physical

interface for digital output (DO) and digital input (DI) that is used for connecting a diversity of external alarm devices such as IR-Sensors

and alarm relays. The digital input is used for connecting external alarm devices and once triggered images will be taken and e-mailed.

Select D/I or D/O

The camera will send a signal when an event is triggered, depending

Mode:

upon the type of device connected to the DI circuit.

N.C. stands for Normally Closed. This means that the normal

state of the circuit is closed. Therefore events are triggered when

the device status changes to "Open."

N.O. stands for Normally Open. This means that the normal state

of the circuit is open. Therefore events are triggered when the

device status changes to "Closed."

Video Output:

Enable/ disable the BNC terminal TV output signal.

D-Link DCS-3714 User Manual

Advanced

D/I and D/O

Pin Block

Table of Contents