Table of Contents
Advertisement
Section 3: Configuration
This screen allows you to control the behavior of digital input (DI)
and digital output (DO) devices. The I/O connector provides the
physical interface for DO and DI that is used for connecting a variety
of external alarm devices, like IR-Sensors and alarm relays. Once the
alarm is triggered, images are recorded and sent by e-mail.
D/I or D/O
The camera will send a signal when an event is
Active State:
triggered, depending upon the type of device
connected and the Active.State selected.
N.C. stands for Normally Closed. Select this option
when the normal state of the circuit is closed.
Therefore events are triggered when the device
status changes to Open.
N.O. stands for Normally Open. Select this option
when the normal state of the circuit is open.
Therefore events are triggered when the device
status changes to Closed.
Click Save.Settings.
D-Link DCS-6115 User Manual
Advanced
Digital Input/Output
DCS-6115
50
Advertisement
Table of Contents
