Section 4 - Configuration
The IP Filter is a feature used to allow or deny certain IP addresses
when accessing the DCS-5222L.
Access List
Check this box to enable the IP Filter function.
Filtering:
Filter Type:
Select whether to set the filter to allow or to
deny connections.
IPv4 Filter List:
The current list of IPv4 addresses that are be-
ing filtered. Select a line and the click the de-
lete button to remove that entry.
IPv6 Filter List:
The current list of IPv6 addresses that are be-
ing filtered. Select a line and the click the de-
lete button to remove that entry.
Add New Filter:
From the drop down menu, select whether to
add a single IP, an entire subnet, or a range of
IP addresses.
Administrator
Check this option and enter the correct IP ad-
IP Address:
dress to always allow it to be able to access
the device.
Click Save Settings to save your changes.
D-Link DCS-5222L User Manual
IP Filter
43