Wireless - D-Link DCS-5020L User Manual

Section 4 - Configuration
To set up your Network camera's wireless network interface settings,
enable Wireless Settings in this window first.
Network Name:
The name of the wireless network.
Site Survey: Click the Rescan button to scan for available wireless
networks. After scanning, select a wireless network from
the drop-down box that you want to connect to.
Wireless Mode: Use the drop-down box to select the mode of the
wireless network you wish to connect to. Infrastructure
is normally used to connect to an access point or router.
Ad-Hoc is usually used to connect directly to another
computer.
Channel:
If you are using Ad Hoc mode, select the channel of the
wireless network you wish to connect to, or select Auto.
Security Mode: Select the type of authentication you are using on your
wireless network (Open, Shared (WEP), WPA-PSK, or
WPA-PSK2).
Cypher Type: If you are using WPA-PSK or WPA-PSK2 authentication,
you will need to specify whether your wireless network
uses TKIP or AES encryption. If you use Open or Shared
authentication, this setting will be automatically set.
Key:
Enter the key or passphase to access a secure network.
Show Hidden Check this box to display the key.
Key:
Antenna:
Select to use the internal or external wireless antenna.
After making any changes, click the Save Settings
button to save your changes, or click the Don't Save
Settings button to discard your changes.
D-Link DCS-5222L User Manual

Wireless

35