Furuno FS-1575 Operator's Manual page 67

3. Rotate the ENTER knob to select [SPECIAL MSG] then push the knob.
4. Rotate the ENTER knob to select [NEUTRAL MSG] then push the knob. [PRIOR-
ITY] is automatically selected to [URGENCY].
5. With [AREA CR] selected, push the ENTER knob.
6. Enter the area range referring to step 5 in paragraph 5.3.1.
7. With [COMM MODE] selected, push the ENTER knob.
8. Rotate the ENTER knob to select [TELEPHONE] or [NBDP-FEC] then push the
knob.
9. Rotate the ENTER knob to select [DSC FREQ] then push the knob.
10. Rotate the ENTER knob to select DSC frequency desired then push the knob. The
communication frequency changes in conjunction with DSC frequency. If you
change the communication frequency, go to step 11. If not, go to step 14.
11. Rotate the ENTER knob to select [COMM FREQ] then push the knob.
12. Rotate the ENTER knob to select [FREQUENCY] or [CHANNEL] then push the
knob.
13. Referring to "How to set working channel, frequency" on page 5-3, set the fre-
quency or channel.
14. Rotate the ENTER knob to select [GO TO CALL] then push the knob to send the
neutral craft call.
[SENDING]
NEUTRAL MSG
AREA
COMM MODE :
COMM FREQ :
5. DSC GENERAL MESSAGE CALLING, RECEIVING
2187.5/ RX 2187.50 kHz
ELAPSED TIME:
° °
34 00 ' N / 135 00 ' E 0500NM
:
TELEPHONE
TX 2182.0 /RX 2182.0
INFO PRINT
00 00 04
H M S
kHz
5-15