Dsc Scan Screen - Furuno FS-1575 Operator's Manual

Indication
CH
TX
RX
SSB/TLX/AM/FAX
OFF/SLOW/FAST
(AGC)
HIGH/MID/LOW(1)/
LOW2
SIMP/S-DUP/DUP
IA/IC/VC/RF/VS
S
NB
NR2/NR1/OFF
NF
SQ
MMSI
LAT, LON
EPFS
ATT
RF GAIN
1.4

DSC Scan Screen

Press the SCAN key to show the DSC scan screen. This screen scans and receives
the distress and routine frequencies.
Main speaker on or off
Channel
TX frequency ( : while transmitting)
RX frequency
Class of emission
Auto gain control ([OFF]: no adjustment, [SLOW]: low-speed, [FAST]: high-
speed)
Output power ([LOW2]: FS-5075 only, minimum output power)
Communication mode ([SIMP]: simplex, [S-DUP]: semi-duplex, [DUP]: full-
duplex (only for FS-5075, option))
Transceiver unit status ([IA]: antenna current, [IC]: collector current,
[VC]: collector voltage, [RF]: RF output, [VS]: source voltage)
S-meter, displays the strength of received signal.
Noise blanker ( :On, No indication: Off)
Noise reduction ( : High,
Notch filter ( : On, No indication: Off)
Squelch ( : On, No indication: Off)
Own ship's ID (nine digits)
Own ship's position (LAT: Latitude, LON: Longitude)
Position data from EPFS
Attenuator ( : On, No indication: Off)
Adjusted value of gain
34°42 . 2800 ' N
135°19 . 5900 ' E
1. OPERATIONAL OVERVIEW
Meaning
: Low, No indication: Off)
RX: Transceiver unit
(WR2 shown when optional
antenna for routine frequencies
is installed.)
Maximum six distress and
routine frequencies scanned.
1-3