Switch Between Files; How To Rename Files; How To Save A File Under A New Name - Furuno FS-1575 Operator's Manual

3. Press the 2 key. A list of files on the floppy disk or the SD card appears.
4. Press the ↑ or ↓ key to select a file.
5. Press the Enter key. The file appears and the title bar shows the file name. You
can repeat this procedure to load another file into a working area.
Note: When two working areas have been opened, the close confirmation window ap-
pears. In this case, select [Yes] or [No] then press the Enter key to close an open file
in order to open another file.
9.5.2

Switch between files

Two files can be opened and one file is displayed on the LCD. To switch between files,
do the following:
1. Press the function key F2.
2. Press the A key to switch between the files.
9.6

How to Rename Files

To rename a file, do the following:
1. Press the function key F1.
2. Press the 5 key.
3. Press the ↑ or ↓ key to select a file to rename then press the Enter key.
4. Enter a new name.
5. Press the Enter key.
9.7

How to Save a File Under a New Name

You can save a file under a new name as follows:
1. Open a file.
2. Edit the file as necessary.
L o a d / M e r g e ( T A B : C h a n g e )
[ A : \ T E S T 1 .
F i l e n a m e
L G F i l e
T E S T 1 .
T E S T 2 .
T E S T 3 .
N B D P
[ E n d o f D i r e c t o r y
4 F i l e s e x i s t
T o s e l e c t : E N T E R T o v i e w : S P A C E T o q u i t : E S C
p e n T e x t
S i z e D a t e & T i m e
5 2 1 2 - 0 4 - 1 0 1 7 : 2 5
1 2 0 1 2 - 0 4 - 1 0 1 6 : 3 0
1 5 1 1 2 - 0 4 - 1 0 9 : 2 5
1 8 0 1 2 - 0 4 - 1 0 2 0 : 1 6
1 6 9 1 2 - 0 4 - 1 0 6 : 2 3
1 4 5 4 0 0 0 b y t e s f r e e
9. NBDP FILE OPERATIONS
]
]
9-7