Furuno FS-1575 Operator's Manual page 28

2. SSB RADIOTELEPHONE
Channel
1. Rotate the ENTER knob to select [CH] on the RT screen then push the knob. You
can also show the channel setting window by pressing the RT/CH key.
2. A channel can be entered directly with the numeric keys, or by using the ENTER
knob. See below for details.
Enter channel with the numeric keys:
Use the numeric keys to enter channel then push the ENTER knob.
Select band and band channel with the ENTER knob:
1) Use the
whichever you want to change.
Cursor position for selection of band
2) Rotate the ENTER knob to set band or band channel desired.
3) Push the ENTER knob to close the setting window.
Frequency
1. Rotate the ENTER knob to select [TX] or [RX] then push the knob.
2. Enter frequency by one of the methods below.
Enter frequency with the numeric keys:
Use the numeric keys to enter frequency then push the ENTER knob. For exam-
ple, to enter 2161 kHz, key in 2, 1, 6, 1, 0. (Note: Keying in 2-1-6-1 sets 216.1
kHz.) Be sure to include zero for 100 Hz place.
Select frequency with the ENTER knob (for RX only):
1) Use the
2) Rotate the ENTER knob to set frequency desired.
3) Push the ENTER knob to close the setting window.
Note: When TX and RX frequencies are different, first enter TX then enter RX.
2-2
Channel setting
window
or key to place the cursor in the band or band channel position,
2 0 0
2 4 6 8 12
ITU band
Setting Range
ITU Band (SSB, TLX): 2/4/6/8/12/16/18/22/25
ITU Band (CW): 4/6/8/12/16/22/25
User Band: 01-029 (First zero is necessary)
ITU Channel (SSB): 00 - XX
ITU Channel (TLX): 000 - XXX
ITU Channel (CW): 001 - XXX
User Channel: 01 - 99
2182.0
TX
or key to change the range which the cursor covers.
Cursor position for selection of band channel
16 18 22 25
2182.00
RX
2 0 0
01 02----- 029
User band