Table of Contents
Advertisement
Menu
Composite
YC
Component
DVI
Slot No
Input No
Screen Aspect
HD
SD
DC 2048 × 1080
52
Input Configuration Menu
Function and operation ([
Sets the composite signal format when BKM-227W is installed.
Auto: Changes automatically according to the format of the input signal.
It will take a few seconds to detect the format of an input signal. It is recommended that
a particular format be selected if it is determined.
NTSC
PAL
PAL-M
SECAM
Sets the Y/C signal format when BKM-227W is installed.
Auto: Changes automatically according to the format of the input signal.
It will take a few seconds to detect the format of an input signal. It is recommended that
a particular format be selected if it is determined.
NTSC
PAL
PAL-M
SECAM
Sets the analog component signal format or analog RGB signal format when BKM-229X is
installed.
You can select from YPbPr or RGB.
Sets the DVI signal format.
Video: Displays the CEA-861 signal.
Computer: Displays the computer output signal such as the VESA standard signal.
For each signal format to be displayed, see page 105.
Enters the option slot number.
You can select from Option1 to Option4, Option1&2 or Option3&4.
Adaptor and the item to be selected
Option1 to Option4
• When the BKM-243HS or BKM-244CC is installed and Format is set to HD-SDI/D1 Auto
• When the BKM-220D, BKM-243HS or BKM-244CC is installed and Format is set to D1
• When the BKM-227W is installed and Format is set to Composite Auto, Composite
NTSC, Composite PAL, Composite PAL-M, Composite SECAM, YC Auto, YC NTSC, YC
PAL, YC PAL-M or YC SECAM
• When the BKM-229X is installed and Format is set to Component YPbPr or Component
RGB
Option1&2, Option3&4
• When two BKM-243HS or BKM-244CC are installed in the OPTION 1 and 2 or OPTION
3 and 4 option slots and Format is set to 4:2:2 YPbPr 10bit, 4:4:4 YPbPr 10bit, 4:4:4
RGB 10bit, 4:4:4 YPbPr 12bit, 4:4:4 RGB 12bit or 4:4:4 XYZ 12bit
Note
When the setting of Format and the installed adaptor do not match, the setting value may not
be changed. Set the Format correctly according to the installed adaptor.
Enters the input connector number.
You can select from [Input 1] or Input 2.
You can select when Format is set to HD-SDI/D1 Auto, D1, 4:2:2 YPbPr 10bit, 4:4:4 YPbPr
10bit, 4:4:4 RGB 10bit, 4:4:4 YPbPr 12bit, 4:4:4 RGB 12bit or 4:4:4 XYZ 12bit.
Note
When the setting of Format and the installed adaptor do not match, the setting value may not
be changed. Set the Format correctly according to the installed adaptor.
Selects the aspect ratio.
Note
This menu is not selectable when Format is set to DVI Computer.
Sets the aspect ratio of the HD signal.
You can select from [16:9] or 2.39:1.
Sets the aspect ratio of the SD signal.
You can select from [16:9] or 4:3.
Sets the aspect ratio of the digital cinema signal (2048 × 1080).
You can select from [1.896:1] or 2.39:1.
]: factory setting)
Advertisement
Table of Contents
