Sony BVN-L230 Operation Manual page 83

Menu
Monitor ID Display
Controller Upgrade
Software Upgrade
Kernel Upgrade
Function and operation ([
Aspect Marker: An aspect marker is displayed on the screen.
The display mode of the aspect marker is set in Aspect Marker (page 60) of the Marker
Setting menu of the Display Function menu.
Note
When External Sync is set to On, the marker may not be shown in the correct position.
Area Marker1: An area marker 1 is displayed on the screen.
The display mode of the area marker 1 is set in Area Marker 1 (page 61) of the Marker
Setting menu of the Display Function menu.
Note
When External Sync is set to On, the marker may not be shown in the correct position.
Area Marker2: An area marker 2 is displayed on the screen.
The display mode of the area marker 2 is set in Area Marker 2 (page 62) of the Marker
Setting menu of the Display Function menu.
Note
When External Sync is set to On, the marker may not be shown in the correct position.
Side by Side: The screen is displayed in the side by side display mode.
Wipe: The screen is displayed in the wipe display mode.
Butterfly: The screen is displayed in the butterfly display mode.
Blending: The screen is displayed in the blending display mode.
Error Notify Clear: Clears the notification detected in the gamut error detection.
Degauss: The CRT is degaussed (only for BVM-A series).
Black Detail Mode: The signal is displayed in black detail mode.
Sets display mode of the display window.
[On]: Always displayed.
Auto: Displayed during operating by the remote connection and disappears
automatically after operation.
Off: Not displayed.
Upgrades the controller.
When the item is selected, the screen for inputting the password is displayed.
After the 4-digit password is entered, the current versions of Software Version and Kernel
Version are displayed.
For the password, see Password (page 74) of the System Configuration menu.
For details on upgrading the controller, see "Upgrading the Monitor and Controller" on page
94.
Upgrades the software for the controller.
Upgrades the kernel of the controller.
]: factory setting)
83
Controller Menu