Rear Panel/Left Side Panel - Sony BVN-L230 Operation Manual

Lcd live monitor
Table of Contents

Advertisement

Rear Panel/Left Side Panel

1 MAIN POWER switch
2 AC IN
connector
a MAIN POWER switch
When turned on (?), the monitor enters operation mode. By
setting in Power menu of the System Configuration menu,
the monitor can also be set to enter standby mode when the
MAIN POWER switch is turned on.
For information about the Power menu, see "Power"
(page 72) of the System Configuration Menu.
b AC IN connector (3-pin)
Connects the monitor to an AC power source, via the
supplied AC power cord.
c DC 5V OUT connector (female)
Supplies the DC power to the controller.
16
Location and Function of Parts
3 DC 5V OUT connector
4 LAN (10/100) connector
5 NETWORK switch
6 PARALLEL REMOTE connector
7 DVI-D connector
8 Input option slots
Connect to the DC 5V/12V IN connector of the controller
with the SMF-700 or the cable supplied with the BKM-
37H.
CAUTION
DC 5V OUT connector (female) is non LPS (Limited
Power Source) circuit.
ATTENTION
Le connecteur DC 5V OUT (femelle) est un circuit non
LPS (Limited Power Source, source d'alimentation
limitée).
d LAN (10/100) connector (10BASE-T/100BASE-TX)
Connect to the LAN (10/100) connector of the controller
by using the SMF-700 or the cable supplied with the BKM-

Advertisement

Table of Contents
loading

Table of Contents