Settings; Selecting The Area - Sony BVN-L230 Operation Manual

Settings

Selecting the Area

When you turn on the monitor for the first time after
purchasing it, select the area where you intend to use this
monitor from among the options.
When the area is selected, the menu item settings suitable
for the selected area are applied.
Default value for each area
5
4
3
3
Color
Temp
1North America D65
2Latin America
Argentina D65
PAL&PAL-N
Paraguay D65
Area
Uruguay D65
NTSC&PAL-
Other Area D65
M Area
3Africa
Australasia
D65
Europe
Middle-East
NTSC Area D65
4Asia Except
Japan
PAL Area D65
D93
5Japan
3
1
2
Color
Setup Component
Gamut
Level Level
Emulation
BVM
7.5% Betacam
SMPTE-C
SMPTE/
0% BVM EBU
EBU-N10
SMPTE/
0% BVM EBU
EBU-N10
SMPTE/
0% BVM EBU
EBU-N10
BVM
7.5% Betacam
SMPTE-C
SMPTE/
0% BVM EBU
EBU-N10
BVM
7.5% Betacam
SMPTE-C
SMPTE/
0% BVM EBU
EBU-N10
SMPTE/
0% BVM EBU
EBU-N10
ENTER button
UP/DOWN buttons
1
Turn on the monitor with the MAIN POWER switch.
The Select Area screen appears.
Select Area
North America B
Latin America B
Africa B
Australasia B
Europe B
Middle-East B
Asia Except Japan B
Japan B
2
Press the UP or DOWN button of the controller to
select the area where you intend to use the monitor and
press the ENTER (Ent) button.
If you select either Latin America or Asia Except
Japan, one of the following screens appears.
If 2 Latin America is selected:
Select Area
Latin America
PAL & PAL-N Area B
NTSC & PAL-M Area B
Select PAL & PAL-N or NTSC & PAL-M and press
the ENTER (Ent) button.
Ent button
1 North America
2 Latin America
3 Africa
Australia/New Zealand
Europe/Russia
Middle East
4 Asia Except Japan
5 Japan
PAL&PAL-N area
NTSC&PAL-M area
Settings
27