Pro Settings - Sony Bravia EZ20L Series Reference Manual

Pro settings

In [Pro settings], you can use various convenient
functions for professional use.
How to use Pro settings
1
Press the HOME/MENU button on the remote
control.
2
Go to [Settings] t [Pro settings], then select
the desired settings.
For each setting, refer to the following.
Initialise Pro settings
All changes will be discarded, and default
settings will be restored.
Install APK
Install the APK file for the Android TV app to the
display using a USB storage media.
1
Select [Pro settings] t [Install APK].
2
Select an APK.
Note
• This menu is displayed only when the .apk file exists
in the USB storage media.
PC input optimisation
Show the typical PC format in full screen by
keeping the aspect ratio.
1
Select [Pro settings] t [PC input
optimisation].
2
Change the settings.
The default setting is Off.
Wake-up on signal
a) Automatically turn on the LCD Monitor and
switch input when an HDMI input is
connected.
b) Automatically turn off the LCD Monitor when
the HDMI input is disconnected.
1
Select [Pro settings] t [Wake-up on signal].
2
Select the option.
[Disable] (Default): The function is disabled.
[Always enabled]: Both function a) and b) are
enabled.
[Input change only]: Only function a) is
enabled.
[Specified hours]: You can specify the start/
end time during which the function is
enabled.
Lock settings
You can protect the settings of [Pro settings] by
using a PIN.
1
Select [Pro settings] t [Lock settings].
2
Set the PIN by following the instruction on the
screen.
Initial input source
Set the input that is displayed when the LCD
Monitor is turned on.
1
Select [Pro settings] t [Initial input source].
2
Select a primary input source.
Power Scheduling
Set the times for the LCD Monitor to turn on and
off automatically, including a schedule to run
periodically (daily or weekly).
1
Select [Pro settings] t [Power Scheduling].
2
Select the time / the day of week to turn on
and off.
Periodic restart
Restart the LCD Monitor at a set time. This can
schedule periodic restarts (daily or weekly). You
can select whether a restart should be executed
or not while the display is on. It is
recommended to schedule a periodic restart of
the LCD Monitor to maintain system stability.
1
Select [Pro settings] t [Periodic restart].
2
Turn on [Periodic restart] function.
3
Set the time, the day of week to restart the
LCD Monitor.
4
Select whether a restart should be executed
or not while the LCD Monitor is on.
Display/Remote controls
Enable or disable the buttons on the LCD
Monitor or the remote control.
1
Select [Pro settings] t [Display/Remote
controls].
2
Select an option.
[Display control]: Enable or disable the
buttons on the display.
[IR remote control]: Enable or disable the
buttons on the IR remote control.
EN GB
7
EN