Eneo DLR-2016/500V Operating Instructions Manual page 63

NOTE: It is possible that no recorded image displays on the current screen. Press the
the screen mode to 4x4. You will be able to easily see the camera have recorded video during target time.
You can also narrow your event search by selecting the Option... button and setting up the new search condition.
Highlight the box beside Check Time Overlap and press the
only be able to turn the Check Time Overlap on or off if a user-defined date and time is set to From and To. If the DVR's
date and time have been reset, it is possible for the DVR to have more than one overlapping start and stop time. When
set to On, you will be asked to select one of the overlapping start and stop time. When set to Off, the DVR will display
search results from all start times to all stop times.
Highlight the box beside Alarm-In and press the
in your search.
Highlight the box beside Motion and press the
of motion detection.
Highlight the box beside Video Loss and press the
reports of lost video.
Highlight the box beside Video Blind and press the
reports of blind video.
Highlight the box beside Text-In and press the
reports of text input.
Highlight the box beside Record Channels and press the
search for any reports of event recorded data. The DVR will display the events (not the camera channels) that occurred
and that also are recorded on the camera channel that you selected. If you do not select a camera channel in this field,
the DVR will search events that are not associated with cameras.
You can also toggle On and Off self-diagnostic System Events as part of your search. The choices are:
Panic Record
Check Recording
Check Alarm-In
Disk Almost Full
Disk Bad
Disk Temperature
Disk S.M.A.R.T.
Fan Error
Disk Config Change
Once you set your desired search conditions, highlight Search and press the
in the Event Log Search screen. Selecting Cancel exits the screen without saving the changes.
You can search video from the first to last recorded images,
or you can set the start and stop times and dates.
Highlight the box beside From and press the
toggle between On and Off. When set to Off, you can enter
a specific Date and Time. When set to On, the search will be
from the first recorded image.
Highlight the box beside To and press the
toggle between On and Off. When set to Off, you can enter
a specific Date and Time. When set to On, the search will be
from the last recorded image .
button. It toggles between On and Off. You will
button. You can select the alarm inputs that you want to include
button. You can select the cameras for which you want any reports
button. You can select the cameras for which you want any
button. You can select the cameras for which you want any
button. You can select the text-in devices which you want any
button. You can select the cameras that you want to
16-Channel Digital Video Recorder
button and change
DISPLAY
button to
button to
button to display the search results
55