Recording Video; Panic Recording; Playing Recorded Video - Eneo DLR-2016/500V Operating Instructions Manual

PIP, 2x2, 1+5, 1+7, 3x3, 4x4
Selecting , , , ,
in the selected multiview screen mode (PIP, 2x2, 1+5, 1+7, 3x3 or 4x4). Selecting each display mode is the same as
pressing the button or scrolling the mouse wheel up and down when in one of the multiview formats (i.e.,
DISPLAY
2x2, 1+5, 1+7, 3x3 or 4x4).
NOTE: The PIP, 1+5, and 1+7 display modes will not be supported in the search mode.
In the 1+5 or 1+7 display mode, the main channel indicates the channel displayed on the large screen
which is displayed in the top-left. You can select the camera you want to display on the main channel
screen. Select a channel on the screen and click the right mouse button to display the Camera Menu.
Selecting Go To Main swaps the selected channel with the main channel. This function is supported
only in the 1+5 and 1+7 display modes and can be activated from any of channel screens except the main
channel screen.
Previous Group, Next Group
Selecting or (Previous Group or Next Group) in the Mouse Display menu moves to the previous or next page.
It is the same as pressing the
OSD
Selecting (OSD) in the Mouse Display menu toggles OSD On and Off.

Recording Video

Once you have installed the DVR following the instructions in Chapter 2 — Installation, it is ready to record. The DVR
will start recording based on the settings you made in the Record setup screen. See Chapter3 — Configuration.
Recycle On or Recycle Off. The factory default is Recycle On. It does this by recording over the oldest video once
the hard disk is full. Setting the DVR to Recycle Off causes it to stop recording once the hard disk is full.
Standard (CIF), High (Half D1) or Very High (D1). The factory default resolution is Standard. When set to Standard,
the DVR has a maximum recording speed of 480 ips. When set to High, the DVR has a maximum recording speed of
240 ips. When set to Very High, the DVR has a maximum recording speed of 120 ips.
Although you will be able to record without changing the unit from its original factory settings, you will want to take
advantages of the DVR's many tools. See Chapter 3 — Configuration for detailed descriptions of the recording mode
options.

Panic Recording

Selecting (Panic) in the Live Monitoring menu or pressing the
and selecting or pressing the button again stops panic recording. If you set the Panic Recording Duration in the Panic
Record setup screen, panic recording will stop automatically according to the preset duration as long as
or the button is not pressed.
PANIC
NOTE: When the DVR is not in the Recycle mode and all available storage space has been used, panic recording
will not operate.

Playing Recorded Video

If a user who has Search authority logs into the system, the user can view recorded image. Once video has been
recorded, you can view it by pressing the
or (PIP, 2x2, 1+5, 1+7, 3x3 or 4x4) in the Mouse Display menu displays the cameras
button.
GROUP
button.
SEARCH
16-Channel Digital Video Recorder
button starts panic recording of all cameras,
PANIC
is not selected
51