Paging Zone - VTech ErisTerminal VSP735 Administrator And Provisioning Manual

Setting
Distinctive Ringing Text
Tone

Paging Zone

On the Paging Zone page, you can enter the multicast IP addresses that the phone will
monitor. When a page is sent out using this multicast IP address, all phones that are
programmed to monitor that IP address will receive the paging RTP stream and play the
page on their speakerphone. You can also enable the phone to send out multicast pages
using a particular multicast IP address.
You must first set up paging groups (each group consisting of a multicast paging IP address
and assigned User IDs) on your SIP PBX. The VSP735 can monitor a maximum of 10
multicast IP addresses.
Setting
Name
Multicast IP
Multicast Port
Using the WebUI
VSP735 Administrator and Provisioning Manual
Description
Enter the text that will match the "info" parameter and play
the ringer tone. The matching of the "info" parameter and
Distinctive Ringing Text is case sensitive. The maximum
length of the Distinctive Ringing Text is 40 characters.
Select the desired ringer from the list.
Description
Enter the name of the paging zone. Names can be a
maximum of 15 characters. The paging zone name is
displayed on the LCD during incoming and outgoing
multicast pages.
Enter the paging zone multicast IP address. The IP
address range for multicast addresses is
224.0.0.0–239.255.255.255.
Enter the multicast port used by the multicast IP address.
The valid port range is 1 to 65535.
60
Back to Contents