VTech ErisTerminal VSP735 Administrator And Provisioning Manual page 40

Setting
Authentication name
Authentication password
Dial Plan
Inter Digit Timeout (secs)
Maximum Number of
Calls
Page Auto Answer
Feature Synchronization
Line Type
Barge-in
DTMF method
Unregister after reboot
Using the WebUI
VSP735 Administrator and Provisioning Manual
Description
If authentication is enabled on the server, enter the
authentication name (or authentication ID) for
authentication with the server.
If authentication is enabled on the server, enter the
authentication password for authentication with the server.
Enter the dial plan, with dialing strings separated by a |
symbol. See "Dial Plan" on page
Sets how long the VSP735 waits after any "P" (pause) in
the dial string or in the dial plan.
Select the maximum number of concurrent active calls
allowed for that account.
When set to Auto, enables the VSP735 to automatically
answer when a page is received. This is usually the desired
behavior for paging.
Enables the VSP735 to synchronize with Broadworks
Application Server. Changes to features such as DND, Call
Forward All, Call Forward No Answer, and Call Forward
Busy on the server side will also update the settings on the
VSP735 menu and WebUI. Similarly, changes made using
the VSP735 or WebUI will update the settings on the
server.
Select the line type to Private or Shared. A private line will
be accessible only at the VSP735 you are configuring.
Shared lines can be assigned to more than one VSP735.
For more information about using shared lines, see the
VSP735 User Guide.
Enables subscribers to shared lines to "barge in" on active
calls on other shared lines.
Select the default DTMF transmission method. You may
need to adjust this if call quality problems are triggering
unwanted DTMF tones or you have problems sending
DTMF tones in general.
Enables the phone to unregister the account(s) after
rebooting-before the account(s) register again as the
phone starts up. If other phones that share the same
account(s) unregister unexpectedly in tandem with the
rebooting VSP735, disable this setting.
40
41.
Back to Contents