Softkey" Module: Custom Soft Key Settings - VTech ErisTerminal VSP735 Administrator And Provisioning Manual

"softkey" Module: Custom Soft Key Settings

The custom soft key settings allow you to select which soft keys can appear on the Idle
screen, the Call Active screen, the Call Held screen and the Live Dial screen. You can also
specify the position of each soft key. Softkeys appear on the VSP735 screen in the same
order as the softkey values you enter. Enter soft key values separated by commas. For
more information, see
12 soft keys (three levels) for each parameter.
The soft key settings follow the format softkey.[element].
All the soft key settings are included in the general configuration file.
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
VSP735 Administrator and Provisioning Manual
"Customizing Soft Keys" on page
softkey.idle
Specifies the soft keys visible on the idle screen.
blank, dir, call_log, redial,
message, dnd, cfwd, cfna,
cfwd_all, cfwd_busy,
intercom, retrieve, callback,
grp_pickup, dir_pickup, line,
settings
softkey.call_active
Specifies the soft keys visible on the active call screen.
blank, new, park_call, end,
hold, transfer, conf, xferline,
confline
softkey.call_held
Specifies the soft keys visible on the held call screen.
blank, new, park_call,
retrieve, grp_pickup,
dir_pickup, end, resume,
transfer, conf, xferline,
confline
softkey.live_dial
Specifies the soft keys visible on the live dial screen.
blank, dir, call_log, redial,
message, end, dial, input,
cancel, backspc
148
18. You can specify a maximum of
Default: line,cfwd,dir,settings
Default: end,hold,transfer,conf,
xferline,confline
Default: end,new,resume,transfer,
conf,xferline,confline
Default: cancel,backspc,input,dial
Back to Contents