Vsp735 Configuration Methods - VTech ErisTerminal VSP735 Administrator And Provisioning Manual

VSP735 Configuration Methods

You can configure the VSP735 using one of the following methods:
 From the VSP735 itself, using the menus. The VSP735 menus are best suited to
configuring a few settings, perhaps after the initial setup has been done. For
administrators, the settings available on the VSP735 menus include network
settings, account settings, and provisioning settings. See
Settings Menu" on page
most useful for end users. Through the menu, they can customize the screen
appearance, sounds, and manage calls. For more information, see the VSP735
User Guide.
 The Web User Interface, or WebUI, which you access using your Internet browser.
See
navigate and best-suited to configuring a large number of VSP735 settings at once.
The WebUI gives you access to every setting required for configuring a single
device. You can enter service provider account settings on the WebUI, configure
the programmable keys, and set up provisioning, which will allow you to
automatically and remotely update the VSP735 after initial configuration.
 Provisioning using configuration files. Working with configuration files is the best
way to configure multiple phones. There are several methods available to enable
the VSP735 to locate and upload the configuration file. For example, you can
enable the VSP735, when it starts up or reboots, to check for the presence of a
configuration file on a provisioning server. If the configuration file is new or has
been modified in any way, the VSP735 automatically downloads the file and
applies the new settings. For more information, see
Configuration Files" on page
Introducing the VSP735
26. Most of the settings accessible on the VSP735are
"Using the WebUI" on page
90.
16
VSP735 Administrator and Provisioning Manual
34. The browser-based interface is easy to
"Provisioning Using
"Using the Admin
Back to Contents