Using The Network Setting Menu - VTech ErisTerminal VSP735 Administrator And Provisioning Manual

Using the Network Setting menu

Use the Network setting menu to configure network-related settings for the VSP735. For
more information about these settings, see
"Advanced Network Settings" on page
To use the Network setting menu:
1. From the Admin Settings menu, press
then press SELECT.
The Network setting menu appears.
Network setting
1.DHCP
2.Set static IP
3.VLAN ID
4.Others
Back
2. Press
 DHCP
 Set static IP
 VLAN ID
 Others (DNS and NTP servers).
To enable or disable DHCP:
1. From the Network setting menu, press
SELECT.
The DHCP screen appears.
DHCP
DHCP:
Cancel
2. Press
Configuration Using the Phone Menus
Select
 
or to highlight the desired option, and then press SELECT:
Enabled
Save
 
to select Enabled or Disabled, and then press
or
VSP735 Administrator and Provisioning Manual
"Basic Network Settings" on page 62
63.
 
to highlight Network setting, and
or
 
to highlight DHCP, and then press
or
28
and
Save .
Back to Contents