Table of Contents
Advertisement
ET605 User Manual
Handset or headset and casing speaker
With dual audio mode activated, other persons present in the room are allowed to listen in to the third party
over the phone's casing loudspeaker.
1. Use the method for handset or headset use to dial.
2. When the call has been established, press
speaker off.
Using different dialing methods
Auto dial
Note: The default setting is off. In administrator mode, the setting can be enabled on the
Advanced Settings page, Behavior tab, Phone Behavior section, Auto Dial setting by selecting a
time span in seconds from the drop-down menu.
When the setting is enabled, the phone will dial the number on the display when the specified number of
seconds has elapsed since the last digit was typed.
Redialing
1. From the idle screen, press
2. Press
to dial that number or use
Calling number from call history (missed, received, dialed calls)
Note: If the call history symbol
settings can be changed on the phone's function key page. For more information, see "Configuring
the function keys" on page 64. Dialed calls can be redialed from the OK key
1. Press
to open the call list.
◦
Press
to open the list of missed calls.
◦
Press
to open the list of received calls.
◦
Press
to open the list of dialed calls. Alternatively, press
dialed calls.
2. Use
/
to select a call.
3. Press
to dial the number.
Calling number from phone directory
1. Press
to open the phone's directory.
2. Use
/
to select a name or enter the first letter(s) of the name on the alphanumeric keypad.
3. Press
to dial the number.
to enable the casing loudspeaker. Press
to show the last numbers dialed, with the very last number at the top.
/
to select a different number and then press
is not available in the function key line, the idle screen
50
.
.
from the idle screen to open the list of
Using the Phone
to turn the
Hide quick links:
Advertisement
Table of Contents
