Phone Settings; Using The Smart Notifications; The Smart Notifications Feature Works Via Bluetooth Connection; Alarm - Polar Electro Loop 2 User Manual

Phone settings

To be able to receive notifications from your phone on your Polar Loop 2, you first need to enable notifications
on the mobile applications from which you want to receive them. You can do this either via the mobile applic-
ation's settings or via your Android phone's App notifications settings. See the user manual of your phone for
further information on App notifications settings.
Then Polar Flow app has to have permission to read the notifications from your phone. You have to give Polar
Flow app access to your phone notifications (i.e. enable notifications in the Polar Flow app). Polar Flow app
guides you to give access when needed (see chapter Setting the Smart Notifications on/off).

Using the Smart Notifications

When getting a notification, your Polar Loop 2 will discreetly alert you by vibrating and showing CALL/ caller's
name*, CALENDAR or MESSAGE on the display. A calendar event and message alert once, while incoming
calls alert until you tap the touch button on your Polar Loop 2, answer the phone, or after alerting for 30
seconds.
*) The caller's name is shown on the display if you have the caller on your mobile phonebook and the name
only includes basic Latin characters and special characters of the following languages: French, Finnish,
Swedish, German, Norwegian or Spanish.

The Smart Notifications feature works via Bluetooth connection

The Bluetooth connection and the Smart Notifications feature work between your Polar Loop 2 and your phone
when they are within the range of 10 m/33 ft from each other. If your Polar Loop 2 is out of range for less than
two hours, your phone restores the connection automatically within 15 minutes when your Polar Loop 2
returns to the range area.
If your Polar Loop 2 is out of range for more than two hours, restore the connection by tapping the touch button
on your Polar Loop 2. The small Bluetooth icon on your phone display starts blinking and turns on when the
connection has been established.
If the Smart Notifications feature doesn't work or stops working, visit
tions.

Alarm

You can set an alarm to your Polar Loop 2 in the Polar Flow mobile app.
1. Open the Polar Flow mobile app.
2. Go to Settings > GENERAL > Alarm
3. Set the alarm ON.
4. Set the alarm time.
5. Set the repetition for the alarm: Mon to Fri, Every day or Off.
polar.com/support
33
for further instruc-