Polar Electro Loop 2 Getting Started Manual

SET UP YOUR POLAR LOOP 2
To take your Polar Loop 2 activity tracker into use, you need a computer with an
Internet connection to access the Polar Flow web service.
1. Open your internet browser,
go to flow.polar.com/start and
download the FlowSync software.
You need FlowSync to setup and
sync your activity tracker.
2. Open the installation package
and follow the on-screen
instructions.
3. Once the installation is complete,
FlowSync opens automatically
and asks you to connect your
Polar product.
4. Plug Polar Loop 2 into your
computer's USB port with the
cable provided in the sales
package. Let your computer
install any suggested USB drivers.
Don't charge the device when the USB
connector is wet.
CUSTOMIZE BRACELET SIZE
1. Open the buckle.
5. The Flow web service opens
automatically in your internet
browser. Create an account,
or sign in if you already have a
Polar account.
6. To finalize the setup click Done.
You need to wait until syncing
is completed, before you can
unplug your Polar Loop 2.
7. If there is a firmware update
2. Detach the buckle from both ends.
available for your Polar Loop 2,
we recommend you install it at
this stage.
You're ready to go. Have fun!
Learn more about your Polar
Loop 2 from the full-length
user manual, FAQs and
tutorial videos at
polar.com/support/Loop2 .
3. Measure your wrist size.
The bracelet is more comfortable to wear when it
is a bit loose.
Example
3 & 2
4. Trim the band from both ends.
Cut along
the line
3 2 1 & 1 2
5. Reattach the buckle.
Wear the bracelet on your non-dominant hand
to get the most accurate results.