Installing Ink Cartridges - MUTOH Rockhopper II User Manual

Rockhopper II - User's Guide

3.5 Installing ink cartridges

The installation of Eco-Solvent ink cartridges for the first time into the Rockhopper II is explained below.
CAUTION
• • • •
When handling Eco-Solvent ink cartridges, be careful that ink does not get in
your eyes or on your skin. However, if this happens, flush the area immediately
with water. Otherwise, your eyes may become congested or inflamed slightly.
If you feel discomfort, consult a doctor immediately.
• • • •
Do not disassemble ink cartridges. Otherwise, ink may get in your eyes or on
your skin.
• • • •
Only use Eco-Solvent ink (ESI) and transition liquid (ESTL). Using other ink (e.g.
dye or pigment) could cause permanent damage to the printer.
NOTE
This product has been tuned for the use of Eco-Solvent ink cartridges. If other manufacturer's products are used,
• drawing results become faint or ink ends are not properly detected, and
• the warranty will not cover (repairs will require a fee) any resultant breakdown.
•
Refer to the following for the types and details of ink cartridges.
Price list
•
Do not shake ink cartridges strongly. Otherwise, ink may leak.
•
Do not disassemble ink cartridges. You cannot use disassembled cartridges.
To install ink cartridges, follow the steps below.
1. Before powering ON the Rockhopper II for the first time, please be sure to have :
• 8 cleaning cartridges
• 8 cartridges of the requested ink configuration
CAUTION
• • • •
When powering ON the Rockhopper II for the first time, a cleaning cycle should be done. Please
follow the instructions mentioned on the display.
2. Check if the Waste Bottle is empty.
3. Power ON the Rockhopper II. The display will request to insert the Cleaning Cartridges.
4. Install the 8 NEW Cleaning Cartridges.
3-9
3 Basic Installation