KYMCO Agility 125 Service Manual page 77

7
. CYLINDER HEAD/VALVES
Remove the two cylinder head bolts.
Remove the four cylinder head nuts and
washers.
＊
Diagonally loosen the cylinder head nuts
in 2 or 3 times.
Remove the camshaft holder and dowel
pins.
Remove the camshaft gear from the cam
chain and remove the camshaft.
CAMSHAFT INSPECTION
Check each cam lobe for wear or damage.
Measure the cam lobe height.
Service Limits:
IN : 29.40mm replace if below
EX: 29.16mm replace if below
Nut
Washer
Camshaft
Cam Chain
AGILITY 125
Bolt
Camshaft Holder
Dowel Pins
Camshaft Gear
7-4