KYMCO Agility 125 Service Manual page 135

12
. FRONT WHEEL/FRONT BRAKE/
FRONT SUSPENSION
Disassembly
Remove the brake caliper seat from the brake
caliper.
Remove the piston from the brake caliper.
If necessary, use compressed air to squeeze
out the piston through the brake fluid inlet
opening and place a shop towel under the
caliper to avoid contamination caused by the
removed piston.
Check the piston cylinder for scratch or wear
and replace if necessary.
Push the piston oil seal outward to remove it.
Clean the oil seal groove with brake fluid.
＊
Be careful not to damage the piston
surface.
Brake Caliper Seat
Compressed Air
Piston Oil Seal
AGILITY 125
12-14