KYMCO Agility 125 Service Manual page 160

14
. BATTERY/CHARGING SYSTEM/
A.C. GENERATOR
Connect the A.C. generator wire connector.
Clean the taper hole in the flywheel off any
burrs and dirt.
Install the woodruff key in the crankshaft
keyway.
Install the flywheel onto the crankshaft with
the flywheel hole aligned with the crankshaft
woodruff key.
＊
The inside of the flywheel is magnetic.
Make sure that there is no bolt or nut
before installation.
Hold the flywheel with the universal holder
and tighten the flywheel nut.
Torque: 3.5~4.5kgf-m
Special
Universal Holder
Install the cooling fan.
Torque: 0.8~1.2kgf-m
14-9
A.C. Generator Wire Connector
Woodruff Key
Universal Holder
Cooling Fan
AGIKITY 125