KYMCO Agility 125 Service Manual page 51

4
. LUBRICATION SYSTEM
ASSEMBLY
Install the outer rotor, inner rotor and pump
shaft into the pump boby.
＊
Install the pump shaft by aligning the flat
on the shaft with the flat in the inner
rotor.
Install the pump cover and tighten the screws
to secure the pump cover.
INSTALLATION
First install the two O-rings onto the oil pump
base.
Install the oil pump into the crankcase.
＊
Fill the oil pump with engine oil before
installation.
After the oil pump is installed, tighten the
three mounting bolts.
4-5
AGILITY 125
Inner Rotor
Pump Shaft
Screws
Pump Cover
O-rings
Oil pump
Bolts
Outer Rotor