KYMCO Agility 125 Service Manual page 125

12
. FRONT WHEEL/FRONT BRAKE/
FRONT SUSPENSION
AGILITY 125
Throttle Cable
Apply grease to the tip of the throttle pipe.
Install the throttle pipe and connect the
throttle cable.
Brake Levers
Install the front and rear brake levers in the
reverse order of removal.
Bolts
Bolts
Axle Nut
FRONT WHEEL
REMOVAL
Jack the motorcycle front wheel off the
ground.
Remove the speedometer cable set screw and
disconnect the speedometer cable.
Remove the front brake cable.
Remove the front axle nut and pull out the
axle.
Remove the front wheel.
Adjusting Nut Brake Cable Speedometer Cable
Remove the front brake panel and side collar.
INSPECTION
AXLE RUNOUT
Set the axle in V blocks and measure the
runout using a dial gauge.
The actual runout is 1 of the total indicator
/
2
reading.
Service Limit: 0.2mm replace if over
12-4