Basic Setup (Lnr400 Series); Step 1: Connect The Ip Cameras; Step 2: Connect The Mouse; Step 3: Connect The Ethernet Cable - Lorex LNR400 SERIES Instruction Manual

6

Basic Setup (LNR400 Series)

6.1 Step 1: Connect the IP Cameras

Option 1: Direct Connection to NVR
• Connect cameras to the PoE Ports on the rear panel of the NVR using Cat5e or higher
grade Ethernet cable. The cameras will appear on the NVR without any additional con-
figuration when the system starts up.
NOTE
Compatible with select Lorex 1080p wired PoE HD cameras only. For a list of compatible cameras,
please visit www.lorextechnology.com/support
Connect IP cameras directly to PoE ports.
Option 2: Connect Cameras to Local Network
You can also connect your IP cameras to your local network for flexible installations. You
will need to do this to connect cameras 9~16 to 16–channel models. For details, see 6.11
Connecting Cameras to the Local Area Network (LAN), page 13.

6.2 Step 2: Connect the Mouse

• Connect a USB mouse (included) to one of the USB ports.

6.3 Step 3: Connect the Ethernet Cable

• Connect an Ethernet cable (included) to the LAN port on the rear panel of the system.
Connect the other end of the Ethernet cable to a router on your network.
#LX400021; r. 3.0/23574/23574; en-US
9