Basic Setup (Lhv2000 Series); Step 1: Connect The Bnc Cameras; Step 2: Connect The Mouse; Step 3: Connect The Ethernet Cable - Lorex LHV2000 Series Instruction Manual

6

Basic Setup (LHV2000 Series)

6.1 Step 1: Connect the BNC Cameras

• Connect cameras to the Video Input ports on the rear panel of the DVR.
NOTE
Connect Lorex 1080p MPX, 720p HD, or analog cameras to the system. For a list of compatible
cameras, please visit www.lorextechnology.com/support.
Push and twist the BNC connector clockwise to secure it to the BNC port.

6.2 Step 2: Connect the Mouse

• Connect a USB mouse (included) to one of the USB ports.

6.3 Step 3: Connect the Ethernet Cable

• Connect an Ethernet cable (included) to the LAN port on the rear panel of the DVR.
Connect the other end of the Ethernet cable to a router on your network.

6.4 Step 4: Connect the Monitor

• Connect the included HDMI cable from the HDMI port to the TV or monitor
(recommended).
OR
#LX400060; r.30328/35049; en-US
10