Configuring The Snapshot Schedule; Configuring Holidays - Lorex LNR400 SERIES Instruction Manual

15 Using the Main Menu

15.3.17 Configuring the Snapshot Schedule

You can set a schedule for recording snapshots from the cameras.
To set up the snapshot schedule:
1. From the Main Menu, click
2. Under Channel, select the channel you would like to configure or select All.
3. Configure the schedule as needed:
• Check Continuous or MD (motion detection) to select the recording type you would
like to configure.
• Click and drag on each day to customize the recording schedule. The schedule is
set up as a grid, which each block representing one hour.
• Click next to All to link the recording schedules for all days. The icon for a day
changes to when it is linked. You can also click the boxes next to individual
days to link them to each other. If the recording schedule is linked, changes made
to one of the days will apply to every day that is linked.
• Click to disable all recording of the selected type on the selected day.
• Click if you need to set a more precise schedule down to the minute.
4. Click OK to save changes.

15.3.18 Configuring Holidays

You can set certain days as holidays. Holidays have a special recording schedule.
#LX400021; r. 3.0/23574/23574; en-US
and then click Storage>Schedule>Snapshot.
67