Connecting To Your System Over The Internet On Pc Or Mac; System Requirements; Step 1 Of 3: Connect Your System To Your Router - Lorex LNR400 SERIES Instruction Manual

16 Connecting to Your System Over
the Internet on PC or Mac
This system features connectivity using the exclusive FLIR Cloud™. This cloud-enabled
service allows for Internet connectivity without requiring any network configuration. Up to 3
devices may connect to the system at the same time.
NOTE
• Except where noted, the PC and Mac instructions in this section are the same.
• For smartphone/tablet setup, see 18 Connecting to your System Using Smartphone or Tablet Apps,
page 110.
• For the latest list of supported apps and devices, visit

16.1 System Requirements

Your system must meet the system requirements below:
Description
CPU
Operating System
Memory
Video
Network (LAN)
Network (WAN)

16.2 Step 1 of 3: Connect your System to Your Router

1. Power off your system by disconnecting the power adapter.
2. Connect an Ethernet cable (included) to the LAN port on the rear panel of the system.
Connect the other end of the Ethernet cable to an empty LAN port (usually numbered
1~4) on your router.
#LX400021; r. 3.0/23574/23574; en-US
www.lorextechnology.com/support.
Requirement
Core 2 Duo 3.0GHz
Windows™ 8/7/Vista
Mac OSX 10.7 and above
2GB
512 MB of video memory and above
10/100 BaseT Network
1 Mbps upstream
High-speed Internet service is required to remotely
connect to your system.
79