Table of Contents
Advertisement
n
5. Press
to return to standby.
8.8
Auto talk
With Auto Talk switched on, you can answer a call just by lifting the handset off the base or
charger. If switched off, you will have to press
1. Press Menu, scroll
2.
Set Handset
is highlighted. Press Select.
d
3. Scroll
to
Auto Talk
n
d
u
4. Scroll
or
to
5. Press
to return to standby.
8.9
Key beep
When you press a button on the CD3 handset, you will hear a beep. You can switch it on
or off.
1. Press Menu, scroll
2.
Set Handset
is highlighted. Press Select.
d
3. Scroll
to
Key Beep
n
d
u
4. Scroll
or
to
5. Press
to return to standby.
8.10
PBX access code
If the CD3 is connected to a switchboard, you may need to enter a one-digit access code
in the dialling sequence to be able to connect to the outside line.
The access code will be displayed at the beginning of a number on the screen. The code
can be up to 4 digits long.
The access code will not be used when you dial the number manually (such as when you
are not dialling from the phonebook). This allows you to make calls to other switchboard
extensions.
1. Press Menu, scroll
2.
Set Handset
is highlighted. Press Select.
d
3. Scroll
to
PBX Access Code
d
u
4. Scroll
or
to Off,
If you select
Set
Code, enter the switchboard access code
n
e.g. 9 then press Save.
5. Press
to return to standby.
Handset settings
d
to
Settings
and press Select.
and press Select.
Off
or
On
then press Select.
d
to
Settings
and press Select.
and press Select.
Off
or
On
then press Select.
d
to
Settings
and press Select.
and press Select.
On
or
Set Code
then press Select.
t
to answer a call.
33
Hide quick links:
Advertisement
Table of Contents
