Table of Contents
Advertisement
DCS 6000 Digital Conference System
Microphone functionality
Microphone
functionality
participant in a conference can use a microphone in
a DCS 6000 Conference Unit to address an
audience. The sound from a conference microphone
is called the 'Floor' sound.
The 'Floor' sound can then be listened to in built-in
loudspeakers in the DCS 6000 Conference Units, in
Language selectors, in Interpreter Sets or the sound
can be feed to an external PA-system.
The number of allowed open microphones can be
set at the CU 61xx however the sound from all the
open microphones is mixed together in the 'Floor'
sound.
User Controls & Indications
The following list shows the function of the facilities
for using the microphone in the units. Please note,
that not all facilities are available at all units:
Speak button (delegate unit)
Pressing the Speak button turns on the microphone
or will place the microphone in the request queue
(see 'Operation modes').
The 'Operation mode' determines the functions of
this button.
Speak button (chairman unit)
Pressing the Speak button turns on the microphone
Speak LED
Lights up with a red colour when the microphone is
ON
Request LED
Lights up with a green colour when the microphone
is put in the request queue (see 'Operation modes').
Delegate off/All del off button (chairman unit)
Pressing the Delegate off/All del off button turns off
all delegate microphones
Delegate off/All del off LED (chairman unit)
Lights up with a green colour when the button is
pressed with the exception of the DC 6990P that
lights up with a red colour in the first release
Mute button
Pressing the Mute button mutes the microphone
while the button is activated without removing the
right to speak
Mute LED
No LED
Exclusive button (chairman unit)
Pressing the Exclusive button mutes all delegate
microphones
and
microphone while the button is activated
is
a
feature
activates
the
chairman
where
Exclusive LED (chairman unit)
Lights up with an orange colour when the button
is activated however in the first release it will
light up with a red colour
Next on button (chairman unit)
Pressing the Next on button turns on the first
request on the request list
Next on LED (chairman unit)
Lights up with a red colour when the button is
activated
Microphone light ring
Lights up with a red colour when the microphone
is ON. If the microphone is muted, the light in
the light ring is turned off during the time the
unit is muted
Microphone connections
XLR microphone connector
The XLR microphone connector is used for
connection of GM 652x series of gooseneck
microphones. The HM 4042 Hand Microphone
can also be connected. However the button on
the hand microphone will not work.
Mini-DIN microphone connector (only "F" models)
A Mini-DIN microphone connector is located at
the back for connection of FD/FC front plates with
GM 65xx F series of gooseneck microphones. The
HM
4042
connected.
This connecter is intended for use, where the
connection to the microphone is remotely from
the front plate, which is only on customised
units.
HD 15S connector (only MU 604x models)
The HD 15S is used for direct remote connection
of FD/FC series of front plates or Microphones
(e.g. HM 4042 or GM 652x in external outlet)
or/and
indicators and loudspeaker. Please refer to the
technical section for pin layout
Important: The microphone input at the
above mentioned connectors does only
support
support other types of microphones i.e.
third part microphones.
Locking of the Microphone
The following units features locking of the
microphone using a tool
25
Hand
Microphone
microphone
control
DIS
microphones
User Manual
can
also
be
buttons,
LED
and
do
not
Advertisement
Table of Contents
