Shure DM 6680 P User Manual page 33

DCS 6000 Digital Conference System
Get the contrast adjustment tool, which has been shipped
1
with your DCS 6000 Central Unit (see photo 1). A new
adjustment tool can be ordered through your authorized
DIS dealer. Order DIS p/n P0 45 00010.
Connect the CM/DM 6xxxF to the DCS 6000 Central Unit
2
and power up the system.
Wait until text appears in the LCD display and the backlight
3
is turned on.
Locate the contrast adjustment hole in the back box of the
4
unit (see photo 2). Units with two channel selectors have
two adjustment holes in the back box, one for each of the
LCD displays.
Carefully insert the tip of adjustment tool into the
5
adjustment hole until the tip of the tool makes contact/lock
with the potentiometer located behind the hole (see photo
3 and 4).
Turn the adjustment tool until the required contrast setting
6
is obtained. Do not use excessive force when turning the
tool, as this will cause the potentiometer to be damaged.
Carefully extract the adjustment tool from the adjustment
7
hole.
Contrast adjustment hole
Insert tip of tool
Potentiometer
33
User Manual
Photo 1
Photo 2
Photo 3
Photo 4