Shure DM 6680 P User Manual page 12

DCS 6000 Digital Conference System
Type Description
The user interface can be changed to support other
languages. Please refer to the 'DCS6000 Upgrade
Manual' for information on creating, editing and
deleting languages as well as uploading them to the
DC 6990P.
The start image can also be changed to support
customised start images (other text, logo etc). Please
refer to the 'DCS6000 Upgrade Manual' for more
information.
The gooseneck microphone GM 652x can be locked
to the unit with a 1.5 mm hex key. The lock is
accessible from the small hole to the left of the XLR
socket. Turn the hex key counter clockwise to lock
the gooseneck microphone to the unit and turn the
hex
microphone from the unit.
The unit can be fixed to the table top using the
mounting holes on the underneath of the unit. Drill a
hole maximum 10mm deep using an Ø 2.5mm drill
and use a bottoming tap M3x0.5 to cut a thread.
Fasten the unit from below the table with a long
screw that fits with the dimension of the screw hole.
The chip card reader is used for authentication and
can only be used in combination with the SW 6000.
The chip cards must be inserted with the chip facing
downwards.
Quick Start Guide
To activate the unit:
1. Press the LCD touch screen
2. Login using code or chip card if requested
3. Navigate on the Main screen using the control
4. Navigate to other screens using the Menu
Start-up screen
When the unit is powered up an initialisation and
start-up screen appears.
It includes the conference name if a conference has
been started in the SW 6000. It also includes a
delegate name if the conference is running with
'prepared delegate seat table', 'login using code and
list', 'login using code on preferred seat' or 'automatic
login on preferred seat' mode.
Press the touch screen to enter.
key clockwise to
buttons
button
unlock the gooseneck
12
Picture
Start-up screen
conference name and delegate
name
User Manual
with