Shure DM 6680 P User Manual page 10

DCS 6000 Digital Conference System
Type Description
Portable Delegate Conference Unit
DM 6680P
•
•
•
•
•
•
•
The unit comes with two standard button overlays.
The overlay to be used can be attached to the unit
by removing the paper on the back of the overlay
and fixing the overlay to the unit. Overlays with
other functionality and in other languages can be
ordered as custom overlays.
The mute and speak/request buttons can be
changed to match the local language. Remove the
plastic caps underneath the unit and insert a thin
device to eject the buttons from underneath.
Insert the new button by clicking it into the unit.
Insert
button(s).
The gooseneck microphone GM 652x can be locked
to the unit with a 1.5 mm hex key. The lock is
accessible from the small hole to the left of the XLR
socket. Turn the hex key counter clockwise to lock
the gooseneck microphone to the unit and turn the
hex key clockwise to unlock the gooseneck
microphone from the unit.
The unit can be fixed to the table top using the
mounting holes on the underneath of the unit. Drill
a hole maximum 10mm deep using an Ø 2.5mm
drill and use a bottoming tap M3x0.5 to cut a
thread. Fasten the unit from below the table with
a long screw that fits with the dimension of the
screw hole.
Lockable XLR microphone connector
Loudspeaker
Speak/request button and Function button
Chip card reader
Channel selector
2 headphone connectors
Exchangeable buttons and button overlays
the plastic caps after changing the
10
User Manual
Illustration