Table of Contents
Advertisement
DCS 6000 Digital Conference System
Type
Description
DC 6190P
Portable Conference Unit
•
•
•
•
•
•
The unit can be configured either as a chairman
or a delegate unit. The unit comes per default with
a delegate configuration.
To
configure
microphone button must be kept down while
pressing the left volume up button for 10 seconds
for chairman functionality or the left volume down
button for delegate functionality. The button light
guides will flash when the unit is configured and
the unit will reboot. The configuration is stored in
the unit so it recalls its configuration if it is used
in another system setup.
The left button is a function button that changes
functionality depending on the configuration. The
chairman configuration enables 'all delegates off'
functionality in the left button while the delegate
configuration
functionality in the left button.
The function button can be changed to match the
current functionality by pushing the button out of
the unit from below. The new button is then
simply clicked into the unit.
The gooseneck microphone GM 652x can be
locked to the unit with a 1.5 mm hex key. The
lock is accessible from the small hole below the
DIS logo on the side of the XLR socket. Turn the
hex key counter clockwise to lock the gooseneck
microphone to the unit and turn the hex key
clockwise to unlock the gooseneck microphone
from the unit.
Configurable as CM and DM
Lockable XLR microphone connector
Loudspeaker
Mute/all del off and speak/request buttons
2 channel selectors
2 headphone connectors
the
unit
the
enables
'mute'
mute
and
the
and
'reply'
9
User Manual
Illustration
Advertisement
Table of Contents
