Table of Contents
Advertisement
DCS 6000 Digital Conference System
Portable conference units
Type
Description
DC 6120P
Portable Conference Unit
•
•
•
•
•
The unit can be configured either as a chairman or
a delegate unit. The unit comes per default with a
delegate configuration.
To configure the unit the mute and the microphone
button must be kept down while pressing the
volume up button for 10 seconds for chairman
functionality or the volume down button for
delegate functionality. The button light guides will
flash when the unit is configured and the unit will
reboot. The configuration is stored in the unit so it
recalls its configuration if it is used in another
system setup.
The left button is a function button that changes
functionality depending on the configuration. The
chairman configuration enables 'all delegates off'
functionality in the left button while the delegate
configuration
functionality in the left button.
The function button can be changed to match the
current functionality by pushing the button out of
the unit from below. The new button is then simply
clicked into the unit.
The gooseneck microphone GM 652x can be locked
to the unit with a 1.5 mm hex key. The lock is
accessible from the small hole below the DIS logo
on the side of the XLR socket. Turn the hex key
counter
microphone to the unit and turn the hex key
clockwise to unlock the gooseneck microphone
from the unit.
Configurable as CM and DM
Lockable XLR microphone connector
Loudspeaker
Mute/all del off and speak/request buttons
Headphone connector and volume control
for floor channel
enables
'mute'
clockwise
to
lock
and
'reply'
the
gooseneck
8
User Manual
Illustration
Advertisement
Table of Contents
