Permobil STREET Owner's Manual page 37

Owner's Manual Street
R-Net control panel LCD monochrome display
Fault
Motor Temperature
Control system Temperature
Timer
E-Stop
The control system can detect a wide variety of
errors. When the system has detected an error that
is not severe enough to cause the system to trip,
then this symbol will be displayed.
This symbol is displayed when the control system
has intentionally reduced the power to the motors, in
order to protect them against heat damage.
This symbol is displayed when the control system
has intentionally reduced its own power, in order to
protect itself against heat damage.
This symbol is displayed when the control system
is changing between different states. An example
would be entering into Programming Mode. The
symbol is animated so that you can see the sand
running through the hourglass.
If the control system is programmed for latched
operation, then it is normal for an Emergency Stop
Switch to be connected into the External Profile
Switch Jack. If the Emergency Stop Switch is
operated or disconnected, this symbol will flash.
37
Design and Function