Permobil STREET Owner's Manual page 33

Owner's Manual Street Design and Function
R-Net control panel LCD monochrome display
Mode
The user can use the Mode key to scroll between the control system's available
modes. The available modes depend on the programming and on which other
output devices are connected to the control system.
Profile
The user can use the Profile key to scroll between the control system's available
profiles. The number of available profiles depends on how the control system
has been programmed. Depending on how the control system has been pro-
grammed, a temporary screen may be displayed when this key is pressed.
Hazard lights*
This key activates and deactivates the wheelchair's hazard lights. Hazard lights
are used when the wheelchair is stationary in a position which may represent a
risk or an obstacle for others. Press this key to activate the hazard lights. Press
it again to deactivate them. When the hazard lights are active, the indicator lamp
next to the control key flashes in time with all the indicators on the wheelchair.
Lights*
This key activates and deactivates the wheelchair's lights. Press this key to
switch the lights on. Press it again to switch them off. When the lights are acti-
vated, the indicator lamp next to the control key is also switched on.
Indicators, left*
This key activates and deactivates the wheelchair's left indicators. Press this key
to activate the indicators. Press it again to deactivate them. When the indicators
are active, the indicator lamp next to the control key flashes in time with the left
indicators on the wheelchair.
Indicators, right*
This key activates and deactivates the wheelchair's right indicators. Press this
key to activate the indicators. Press it again to deactivate them. When the indica-
tors are active, the indicator lamp next to the control key flashes in time with the
right indicators on the wheelchair.
*
Applies only if the wheelchair is fitted with lights.
33