Permobil STREET Owner's Manual page 49

Owner's Manual Street
R-Net control panel LED
Charger Socket
This socket should only be used for charging or locking the wheelchair. Do not
connect any type of programming cable into this socket This socket should not
be used as a power supply for any other electrical device. Connection of other
electrical devices may damage the control system or affect the E.M.C. perfor-
mance of the wheelchair.).
m
WARNING
The wheelchair's warranty will be voided if any device other than a battery charger supplied with the
wheelchair, or the lock key is connected into the control panels charger socket.
Charging socket
49
Design and Function
Charging plug
Connect he
charging plug
with the guide
upwards.