Using Bluetooth: Pairing Your Device Manually - iHome iKN95 Instruction Manual

Pairing Your Device Manually
Pairing is the set-up process to introduce your Bluetooth-capable device to the iKN95. Once
your device is paired, the iKN95 can recognize it and you can play your audio through it.
1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and make
it "discoverable" by turning on Bluetooth mode (check in Options or Settings).
2. Press the
enter auto-pairing mode and attempt to connect to a Bluetooth device. Otherwise, follow
step 3 to begin pairing.
3. Press and hold the
Bluetooth Button will flash quickly, indicating the unit is in pairing mode.
4. "iHome Kineta iKN95" should appear in your device's Bluetooth menu. If "Not Paired", "Not Connected"
or similar message appears, select "iHome Kineta iKN95" to connect it. If prompted for a passcode,
enter "1234" on your device's keypad.
iHome Kineta iKN95
For iPhone
5. If pairing is successful, a tone will sound and the Bluetooth Button light will glow solid, indicating the
iKN95 is ready to play music. There should also be an indication on your device. If no device is successfully
paired within 3 minutes the iKN95 will default to previous mode. Once the iKN95 is paired to a device,
it will attempt to autolink when the device is within range (about 30 feet).
Power Button to turn on the iKN95. The first time the unit is powered on, it will
Bluetooth Button for 2 seconds. The pairing sound will play and the
iHome Kineta iKN95
Using the
iHome Kineta iKN95
For other
15
iKN95
iHome Kineta iKN95